Rotary Cultivator three-point suspended manufacturers tell you that the rotary cultivator has the functions of breaking the bottom of the plow, restoring the structure of the soil ploughing layer, improving the ability of soil water storage and moisture retention, eliminating some weeds, reducing pests and diseases, leveling the surface and improving the standard of agricultural mechanization.

Mechanical adjustment of the rotary tiller:
1. Horizontal adjustment left and right. Rotary Cultivator three-point suspended The manufacturer tells you to park the tractor with the rotary cultivator on the flat ground at first, lower the rotary cultivator so that the blade is 5 cm away from the ground, and observe whether the height of the left and right blade tips from the ground is the same to ensure that the operation is in progress. The cutter shaft is level and the tillage depth is uniform.
2. Front and rear horizontal adjustment. Rotary Cultivator three-point suspended The manufacturer tells you that when the rotary tiller is lowered to the required tillage depth, observe whether the angle between the universal joint and one axis of the rotary tiller is close to the horizontal position. If the included angle of the universal joint is too large, the upper pull rod can be adjusted so that the rotary tiller is in a horizontal position.
3. Lift height adjustment. In the rotary tillage operation, the included angle of the universal joint is not allowed to be greater than 10 degrees, and it is not allowed to be greater than 30 degrees when the headland turns. Therefore, for the lifting of the rotary cultivator, the available screws for the use of position adjustment can be screwed to the appropriate position of the handle; the manufacturer of the Rotary Cultivator three-point suspended tells you to use the height adjustment, pay special attention when lifting, if you need to raise the rotary cultivator again machine, the power of the universal joint should be removed.